Featured Wood Creations
This is the premium version of my original 36 inch cedar railing planter. I build these with plant enthusiasts in mind because I grow peppers myself, so drainage, durability, and real‑world use matter. All boards are run through a thickness planer for clean, even surfaces. Every mating surface is hand‑planed to improve assembly, glue‑up, fit, and overall structural integrity. It makes the planter tighter, stronger, and cleaner than a simple thickness‑planed build.
The entire planter gets a seal, stain, and UV protection coat. This finish should last about three years under normal outdoor use. The inside gets spar urethane as the second coat, under the liner. The liner helps retain moisture, so the spar urethane is there to protect the cedar and extend the life of the planter.
The drain holes are drilled through the side that faces outward over the railing, not through the bottom. This keeps water off your deck and railings. The drain holes themselves get spar urethane, along with the drain exit area on the outside. Because of that, you may see a spot on the outside that looks like something dripped during finishing. That’s intentional. It’s part of sealing the drain hole so water doesn’t soak into the cedar or cause long‑term damage.
The 36 inch length gives you plenty of planting space for peppers, herbs, flowers, or anything that needs room to spread. Each planter is made to order, so I need your railing width to build a clean, balanced fit.
Premium features:
Thickness‑planed boards for clean, even surfaces
Hand‑planed mating surfaces for tight joints and stronger assembly
Seal, stain, and UV protection on the full planter
Finish designed to last about three years
Spar urethane second coat on the inside under the liner
Side‑drilled drain holes that drain away from the deck
Drain holes and outer drain exit sealed with spar urethane
Intentional spar urethane drip mark on the outside from sealing the drain exit
Liner included
Built to your railing width for a precise fit
Made by hand in Anchorage
Custom handcrafted railing planter box (36"L × 9"W × 9"D). Designed with an underside channel so it sits directly over your deck railing without brackets. The face boards are planed smooth for a clean, finished look, while knots are treated and stabilized so the wood stays solid over time. Built with simple, reliable joinery and no unnecessary internal bracing. Finished with clean 45‑degree mitered top trim and left in natural raw wood, ready for paint, stain, or use as‑is. For the best fit and a clean, intentional look, I’ll need your railing width so the planter can be sized to sit properly on your setup.
To place an order, send an email with your railing width and the dimensions you’d like your planter built to.
jon@alaskanaf.com
This handcrafted cedar railing planter is built for smaller spaces while keeping the same solid design and clean lines as the larger builds. Each piece is planed, fitted, and assembled by hand for a tight, durable structure. The 18‑inch length makes it ideal for compact decks or balcony rails without losing planting depth or strength.
Every planter is left in raw cedar so you can finish it however you like, or keep the natural look. Designed to sit directly over your deck railing, it offers a balanced fit and a clean, intentional appearance.
To place an order, please email Jon with your railing width and the dimensions you’d like for your custom build.
This raised bed planter is built from rough‑cut cedar, giving it a natural, rustic look with visible grain and character. Each piece is cut and assembled by hand using simple, solid joinery and finished with clean 45‑degree mitered top trim. It’s designed for deck or yard setups where you want an elevated planting space that looks intentional and sturdy. Made for growing flowers, herbs, or vegetables in a compact footprint, it’s left in raw wood so you can paint, stain, or use it as‑is. To place an order, please email Jon with the dimensions you’d like for your custom build.
This handcrafted cedar planter is built from planed boards for a clean, refined look while keeping the natural grain and color of the wood. Each piece is cut and assembled by hand using simple, solid joinery and finished with crisp 45‑degree mitered top trim. Designed for small deck or yard setups, it’s sturdy, compact, and left in raw wood so you can paint, stain, or use it as‑is. To place an order, please email Jon with the dimensions you’d like for your custom build.
Start a project with me
Got an idea for a build? Tell me what you’re thinking — size, style, finish, or just the general concept. I’ll take a look and get back to you with a plan that fits your space and budget.
I handle every project myself here in Anchorage and I like working with people who care about quality. Whether it’s a railing planter, raised bed, or something new you’ve been thinking about, we’ll figure out the right design, size, and finish together.
Fill out the form and tell me what you’re after. I’ll reply with a plan, timeline, and quote once I’ve looked it over.
Looking forward to building something solid with you.